Hi.
My scotte controller is flashing LO, the auger in my burner is running all the time, the Fan will not run and the burner will not fire.
I have tried to reset the controller and I have plugged it out for 12 hours but it will not reset.
When I plug it in the controller cycles through its settings and then flashes LO. I can Force the hopper feed auger to run by holding the down arrow when plugging in but it keeps flashing LO.
Is there another reset I can try or is there is there a manual that I can download that will help.
Thank you
Har du lyst til at støtte Stoker Pro? Læs mere her: Støt Stoker Pro Forum
Scotte controller flashing "LO"
-
- Stoker I
- Indlæg: 5
- Tilmeldt: 01 okt 2012 19:50
- Givet likes: 1 gang
- Brandsen
- Stoker XVII
- Indlæg: 3485
- Tilmeldt: 21 okt 2009 23:02
- Mit fyr: Baxi Multi Heat 2.5 + Scotte BS1016 Mini
- Areal: 425 m2
- Brændsel: Spildkorn - Træpiller
- Fremviser gerne i postnummer: 4300
- Årligt forbrug: ca 10 tons
- Geografisk sted: Holbæk
- Givet likes: 1 gang
- Modtaget likes: 136 gange
Re: Scotte controller flashing "LO"
Hi,
There is a small battery in the Scotte controller, so I could suggest you try
take that out for a minute, and see if that will reset the controller for you.
There is a small battery in the Scotte controller, so I could suggest you try
take that out for a minute, and see if that will reset the controller for you.
__________________________________________________________________
Med venlig hilsen, Brandsen
Baxi Multi Heat 2.5 med 600l tank, iltstyring, prom 1.08 ( Installeret Oktober 2005 )
Scotte BS Mini 10kw ( Installeret Juni 2013 )
Med venlig hilsen, Brandsen
Baxi Multi Heat 2.5 med 600l tank, iltstyring, prom 1.08 ( Installeret Oktober 2005 )
Scotte BS Mini 10kw ( Installeret Juni 2013 )
-
- Stoker I
- Indlæg: 5
- Tilmeldt: 01 okt 2012 19:50
- Givet likes: 1 gang
-
- Stoker I
- Indlæg: 5
- Tilmeldt: 01 okt 2012 19:50
- Givet likes: 1 gang
Re: Scotte controller flashing "LO"
Up date.
I disconnected the controller and burner and inspected the connections and the board but couldn't find a problem. I cleaned the burner, photo cell and re assembled it all. It is now back working again but I don't know what the problem was. If anybody has a PDF manual for this controller and burner I would greatly appreciate a copy or is there some where I can buy one.
Again Many thanks.
I disconnected the controller and burner and inspected the connections and the board but couldn't find a problem. I cleaned the burner, photo cell and re assembled it all. It is now back working again but I don't know what the problem was. If anybody has a PDF manual for this controller and burner I would greatly appreciate a copy or is there some where I can buy one.
Again Many thanks.
- pille bruger
- Supporter
- Indlæg: 9830
- Tilmeldt: 14 nov 2008 17:57
- Mit fyr: RTB
- Areal: 160
- Brændsel: piller + 30 rør solfanger
- Dagligt forbrug: 10 kg.
- Årligt forbrug: 3400 kg.
- Geografisk sted: Svendborg
- Givet likes: 81 gange
- Modtaget likes: 275 gange
Re: Scotte controller flashing "LO"
The message LO means:Rathairthir skrev:Hi.
My scotte controller is flashing LO, the auger in my burner is running all the time, the Fan will not run and the burner will not fire.
I have tried to reset the controller and I have plugged it out for 12 hours but it will not reset.
When I plug it in the controller cycles through its settings and then flashes LO. I can Force the hopper feed auger to run by holding the down arrow when plugging in but it keeps flashing LO.
Is there another reset I can try or is there is there a manual that I can download that will help.
Thank you
The boiler temperature has not been above
35 ° c after 2 hours of operation,
or has gone below 35 degrees in operation.
I have no manual in English.
Link to the Danish manual http://nbe.dk/wp-content/uploads/2015/0 ... e-4.99.pdf
From there you can use Google Translate
Best regards
Michael fra StokerCloud Service http://www.nbe.dk/sadan-fungere-stokercloud/
Find manualer her https://www.nbe.dk/manualer-nbe/
Tekniske vejledninger https://www.nbe.dk/tekniske-vejledninger/
Michael fra StokerCloud Service http://www.nbe.dk/sadan-fungere-stokercloud/
Find manualer her https://www.nbe.dk/manualer-nbe/
Tekniske vejledninger https://www.nbe.dk/tekniske-vejledninger/
- Brandsen
- Stoker XVII
- Indlæg: 3485
- Tilmeldt: 21 okt 2009 23:02
- Mit fyr: Baxi Multi Heat 2.5 + Scotte BS1016 Mini
- Areal: 425 m2
- Brændsel: Spildkorn - Træpiller
- Fremviser gerne i postnummer: 4300
- Årligt forbrug: ca 10 tons
- Geografisk sted: Holbæk
- Givet likes: 1 gang
- Modtaget likes: 136 gange
Re: Scotte controller flashing "LO"
Hi there,
Good to see you are back in operation, and no, we only do manuals and instructions in native Viking language,
because there really is no world outside the Viking boarders, well ok, except of course the duty free shops just
south of our boarder to Germany
So, in case of further trouble, feel free to ask, user Pillebruger is the local Viking wizard, cheers
Good to see you are back in operation, and no, we only do manuals and instructions in native Viking language,
because there really is no world outside the Viking boarders, well ok, except of course the duty free shops just
south of our boarder to Germany
So, in case of further trouble, feel free to ask, user Pillebruger is the local Viking wizard, cheers
__________________________________________________________________
Med venlig hilsen, Brandsen
Baxi Multi Heat 2.5 med 600l tank, iltstyring, prom 1.08 ( Installeret Oktober 2005 )
Scotte BS Mini 10kw ( Installeret Juni 2013 )
Med venlig hilsen, Brandsen
Baxi Multi Heat 2.5 med 600l tank, iltstyring, prom 1.08 ( Installeret Oktober 2005 )
Scotte BS Mini 10kw ( Installeret Juni 2013 )