I hope someone can help me since my Danish is really bad.
My name is Sean im 39 and moved with my family to denmark. In our house we have a Baxi Multiheat 2.5. The house is from 1904 with a living space of 254 m2. Top and bottum floor are heated with floor heating.
We also have a Solar system with a 1000 l puffer Tank. The stoker does not have a oxygen control. So right now im running it on hi out put until the temp is reached . Here are the specs.
Hi:
49
24
0.5
Low:
8
50
0.3
For some reason the low numbers that i wrote just dont work for a 2 step control of the stoker , even thou the Manual shows this Numbers.Can someone give me a hint to what no. i should adjust?
Also mybe where i can buy the lambda kit and a outside temp control?
Im also having abit problems adjusting the stoker to the temps outside since its not that cold yet i keep running throu the dew point?
Mange Tak
Sean
Har du lyst til at støtte Stoker Pro? Læs mere her: Støt Stoker Pro Forum
New and a lot of Questions
- thy
- Supporter
- Indlæg: 10378
- Tilmeldt: 09 dec 2006 17:17
- Mit fyr: Baxi 1,5 350L
- Areal: 190 +værksted 130
- Brændsel: Estonia
- Fremviser gerne i postnummer: 5560
- Dagligt forbrug: ca 8-30
- Årligt forbrug: ca 5-6
- Geografisk sted: Frøbjerg (FYN)
- Givet likes: 101 gange
- Modtaget likes: 269 gange
- Kontakt:
New and a lot of Questions
PS my inglish stinksmurph73 » 31 Oct 2012, 15:37 skrev:I hope someone can help me since my Danish is really bad.
My name is Sean im 39 and moved with my family to denmark. In our house we have a Baxi Multiheat 2.5. The house is from 1904 with a living space of 254 m2. Top and bottum floor are heated with floor heating.
We also have a Solar system with a 1000 l puffer Tank. The stoker does not have a oxygen control. So right now im running it on hi out put until the temp is reached . Here are the specs.
Hi:
49*********40
24********16
0.5*******0,3
Low:
8 *************8
50*********** 20
0.3***********0,1
try this all setings at once start with hi first
driftformsknap the one that looks like 1 on at dice THERE must not be ligt in that Driftformsknap then can baxi not shift HI/LO....
http://sortvvs.dk/varmesystemer-252/sto ... -3345.html
fits all baxi 1,5 2,5 4,0
For some reason the low numbers that i wrote just dont work for a 2 step control of the stoker , even thou the Manual shows this Numbers.Can someone give me a hint to what no. i should adjust?
Also mybe where i can buy the lambda kit and a outside temp control?
Im also having abit problems adjusting the stoker to the temps outside since its not that cold yet i keep running throu the dew point?
Mange Tak
Sean
Mvh thy.... ps viser gerne Banditten frem hvis det sku være
https://stokerlog.dk/public.php?userid= ... 96df9256b2
Flemming Illum Nielsen
https://stokerlog.dk/public.php?userid= ... 96df9256b2
Flemming Illum Nielsen
-
- Stoker I
- Indlæg: 3
- Tilmeldt: 18 nov 2011 10:42
New and a lot of Questions
Thank You so much , i will try the settings right away! Your english is way better then my danish
Best regards
Sean
Best regards
Sean
- thy
- Supporter
- Indlæg: 10378
- Tilmeldt: 09 dec 2006 17:17
- Mit fyr: Baxi 1,5 350L
- Areal: 190 +værksted 130
- Brændsel: Estonia
- Fremviser gerne i postnummer: 5560
- Dagligt forbrug: ca 8-30
- Årligt forbrug: ca 5-6
- Geografisk sted: Frøbjerg (FYN)
- Givet likes: 101 gange
- Modtaget likes: 269 gange
- Kontakt:
New and a lot of Questions
thank youmurph73 » 31 Oct 2012, 17:36 skrev:Thank You so much , i will try the settings right away! Your english is way better then my danish
Best regards
Sean
were do you live in Denmark..?
Mvh thy.... ps viser gerne Banditten frem hvis det sku være
https://stokerlog.dk/public.php?userid= ... 96df9256b2
Flemming Illum Nielsen
https://stokerlog.dk/public.php?userid= ... 96df9256b2
Flemming Illum Nielsen
-
- Stoker I
- Indlæg: 3
- Tilmeldt: 18 nov 2011 10:42
- Brandsen
- Stoker XVII
- Indlæg: 3485
- Tilmeldt: 21 okt 2009 23:02
- Mit fyr: Baxi Multi Heat 2.5 + Scotte BS1016 Mini
- Areal: 425 m2
- Brændsel: Spildkorn - Træpiller
- Fremviser gerne i postnummer: 4300
- Årligt forbrug: ca 10 tons
- Geografisk sted: Holbæk
- Givet likes: 1 gang
- Modtaget likes: 136 gange
New and a lot of Questions
Hi there,
As just prescribed by Doctor Thy, the most important item is not to have light in 'driftsform' button,
as this will inhibit the Baxi switching automatically between high load 100% and low load 30%-100%,
and with 254m2 to heat, the Baxi 2.5 should run in low load almost all of the time.
For Baxi 2.5 the lambda kit is really convenient, as it will automatically adjust the blower to the
oxygen level needed for optimal combustion in the chamber, and hence remove the need for manual intervention
every now and then.
Also, a real 'must have' on any stoker boiler is a draft inhibitor, as this will ensure a more even
combustion, and also yield a lower pellet consumption, be preventing the nice hot smoke to be 'pulled'
out of the boiler prematurely, before it has heated the boiler body. Really good investment, cost is about dkr 600,-
Do you already have a draft inhibitor installed ?
As just prescribed by Doctor Thy, the most important item is not to have light in 'driftsform' button,
as this will inhibit the Baxi switching automatically between high load 100% and low load 30%-100%,
and with 254m2 to heat, the Baxi 2.5 should run in low load almost all of the time.
For Baxi 2.5 the lambda kit is really convenient, as it will automatically adjust the blower to the
oxygen level needed for optimal combustion in the chamber, and hence remove the need for manual intervention
every now and then.
Also, a real 'must have' on any stoker boiler is a draft inhibitor, as this will ensure a more even
combustion, and also yield a lower pellet consumption, be preventing the nice hot smoke to be 'pulled'
out of the boiler prematurely, before it has heated the boiler body. Really good investment, cost is about dkr 600,-
Do you already have a draft inhibitor installed ?
__________________________________________________________________
Med venlig hilsen, Brandsen
Baxi Multi Heat 2.5 med 600l tank, iltstyring, prom 1.08 ( Installeret Oktober 2005 )
Scotte BS Mini 10kw ( Installeret Juni 2013 )
Med venlig hilsen, Brandsen
Baxi Multi Heat 2.5 med 600l tank, iltstyring, prom 1.08 ( Installeret Oktober 2005 )
Scotte BS Mini 10kw ( Installeret Juni 2013 )
- pelle
- Supporter
- Indlæg: 3400
- Tilmeldt: 21 feb 2008 18:05
- Mit fyr: vigas 25 gasogen 2x1200 l akku
- Areal: 240
- Brændsel: gran og fyr og sol
- Fremviser gerne i postnummer: 6900
- Årligt forbrug: 3.5 tons træ pr. år
- Geografisk sted: lidt syd for herning
- Givet likes: 296 gange
- Modtaget likes: 368 gange
New and a lot of Questions
Nøøj,,, du er hård til Engelsk, Brandsen...Respekt...Brandsen » 31 Oct 2012, 19:26 skrev:Hi there,
As just prescribed by Doctor Thy, the most important item is not to have light in 'driftsform' button,
as this will inhibit the Baxi switching automatically between high load 100% and low load 30%-100%,
and with 254m2 to heat, the Baxi 2.5 should run in low load almost all of the time.
For Baxi 2.5 the lambda kit is really convenient, as it will automatically adjust the blower to the
oxygen level needed for optimal combustion in the chamber, and hence remove the need for manual intervention
every now and then.
Also, a real 'must have' on any stoker boiler is a draft inhibitor, as this will ensure a more even
combustion, and also yield a lower pellet consumption, be preventing the nice hot smoke to be 'pulled'
out of the boiler prematurely, before it has heated the boiler body. Really good investment, cost is about dkr 600,-
Do you already have a draft inhibitor installed ?
Solceller 7.6 kw anlæg. 40 x 190 watt. 42 gr. taghældning. 25 gr. mod vest fra stik syd. 2 stk 3 kw KLNE invertere.
V. pumpe Luft/luft . Panasonic. CS.HE9LKE/ CU.HE9LKE
Livet er ikke så fattigt på glæder, når bare man kommer de rigtige steder.
V. pumpe Luft/luft . Panasonic. CS.HE9LKE/ CU.HE9LKE
Livet er ikke så fattigt på glæder, når bare man kommer de rigtige steder.