Har du lyst til at støtte Stoker Pro? Læs mere her: Støt Stoker Pro Forum
16-24kw burner problems
-
- Stoker II
- Indlæg: 53
- Tilmeldt: 09 jan 2016 13:35
Re: 16-24kw burner problems
Right now the question is: is it technical disfunction or software glitch.
I have changed basically every component that might cause trouble.
The "brain", control box. Chip - twice in the control box, all the sensors, all the capacitors, the plate on the burner where every wire is connected.
Today i'm going to find if some one could come and measure chimney draft to be certain that it is sufficient.
You guys have been a great help already and I appreciate it . At least now I know a lot more about the system and it is actually working now a lot better.
I have changed basically every component that might cause trouble.
The "brain", control box. Chip - twice in the control box, all the sensors, all the capacitors, the plate on the burner where every wire is connected.
Today i'm going to find if some one could come and measure chimney draft to be certain that it is sufficient.
You guys have been a great help already and I appreciate it . At least now I know a lot more about the system and it is actually working now a lot better.
-
- Stoker II
- Indlæg: 53
- Tilmeldt: 09 jan 2016 13:35
Re: 16-24kw burner problems
Update.
Chimney expert came. Checked and cleaned everything. Draft is good now. The chimney was dirtier than it should have been since it was cleaned in autumn.
Started the blower adjustment again and noticed now that when I reduce the blower value then it will not do anything. Tried it on 100% and reduced the Blow High value even to 5% but there was no change. That felt kind a strange...
Chimney expert came. Checked and cleaned everything. Draft is good now. The chimney was dirtier than it should have been since it was cleaned in autumn.
Started the blower adjustment again and noticed now that when I reduce the blower value then it will not do anything. Tried it on 100% and reduced the Blow High value even to 5% but there was no change. That felt kind a strange...
- T-mek
- Stoker XVI
- Indlæg: 1654
- Tilmeldt: 21 jul 2013 15:13
- Mit fyr: Scotte 10kw, V.7, semi-rens, 160L VVB.
- Areal: 160 + 60 i værksted
- Brændsel: 8mm træpiller
- Fremviser gerne i postnummer: 4990
- Årligt forbrug: 5500 til 6000 kg.
- Geografisk sted: 4990 Sakskøbing
- Givet likes: 43 gange
- Modtaget likes: 86 gange
Re: 16-24kw burner problems
So the blower is running at the same speed all the time ?manniste skrev:Update.
Chimney expert came. Checked and cleaned everything. Draft is good now. The chimney was dirtier than it should have been since it was cleaned in autumn.
Started the blower adjustment again and noticed now that when I reduce the blower value then it will not do anything. Tried it on 100% and reduced the Blow High value even to 5% but there was no change. That felt kind a strange...
That might be a bad output in the control box.
/ Christian
Har gerne lidt dele til NBE / Baxi + diverse pumper på hylden.
Har gerne lidt dele til NBE / Baxi + diverse pumper på hylden.
-
- Stoker II
- Indlæg: 53
- Tilmeldt: 09 jan 2016 13:35
Re: 16-24kw burner problems
I noticed it only on 100% power. On 10% and 50% it kind a was fine.
It increased the power of blower but it certainly didnt slow down to anymore. At least I think it increased the power...
And the control box is a new one...
Is there any chance to check the blower?
It increased the power of blower but it certainly didnt slow down to anymore. At least I think it increased the power...
And the control box is a new one...
Is there any chance to check the blower?
-
- Stoker XIX
- Indlæg: 5479
- Tilmeldt: 02 aug 2011 21:08
- Mit fyr: 24 kw black star semirens
- Areal: 200
- Brændsel: piller
- Fremviser gerne i postnummer: 4261
- Årligt forbrug: 7,2 tons
- Geografisk sted: høve - skælskør
- Givet likes: 405 gange
- Modtaget likes: 423 gange
Re: 16-24kw burner problems
I do not know if you have the chance to borrow an optic revelution counter (we have one at my work)
-
- Stoker II
- Indlæg: 53
- Tilmeldt: 09 jan 2016 13:35
Re: 16-24kw burner problems
But there is anomaly. Randomly somethings stops responding. Etc the blower value, I tried to change it from control box and from PC but nothing changed...until I pulled the plug and put it back. Then it responded for about 20min without touching anything. This seems strange :s
Ok, I recorded via mobile my flames at 10,50,100%
10% power and blower 12:
https://drive.google.com/file/d/0B1xlrM ... sp=sharing
50% power blower 18
https://drive.google.com/file/d/0B1xlrM ... sp=sharing
100% power blower 25
https://drive.google.com/file/d/0B1xlrM ... sp=sharing
Ok, I recorded via mobile my flames at 10,50,100%
10% power and blower 12:
https://drive.google.com/file/d/0B1xlrM ... sp=sharing
50% power blower 18
https://drive.google.com/file/d/0B1xlrM ... sp=sharing
100% power blower 25
https://drive.google.com/file/d/0B1xlrM ... sp=sharing
-
- Stoker II
- Indlæg: 53
- Tilmeldt: 09 jan 2016 13:35
Re: 16-24kw burner problems
This night again it managed to fill the burning grate to the top that the photosensor didn't see any light anymore and air didn't manage to blow through. It idled at 38% (or at least it thought so) but kept adding and adding pellets.
I'm clueless :s
I'm clueless :s
-
- Stoker II
- Indlæg: 53
- Tilmeldt: 09 jan 2016 13:35
Re: 16-24kw burner problems
Final update here.
I gave up.
Bought new v7 control with 30kw burner.
Thanks for everything and hope this one works longer
I gave up.
Bought new v7 control with 30kw burner.
Thanks for everything and hope this one works longer
-
- Stoker XIX
- Indlæg: 5479
- Tilmeldt: 02 aug 2011 21:08
- Mit fyr: 24 kw black star semirens
- Areal: 200
- Brændsel: piller
- Fremviser gerne i postnummer: 4261
- Årligt forbrug: 7,2 tons
- Geografisk sted: høve - skælskør
- Givet likes: 405 gange
- Modtaget likes: 423 gange
Re: 16-24kw burner problems
i had mine scotte since 2005, and it is still gong strong, (had to replace my burner control thu)
-
- Stoker I
- Indlæg: 2
- Tilmeldt: 13 mar 2019 08:39
Re: 16-24kw burner problems
is that the good boiler and electronics? would they serve me for long time and what would be important to keep eye on?